Painting Wilsonville's Planned Communities
Wilsonville is one of our closest service areas — just 20 minutes north on I-5. The city is known for its planned communities like Charbonneau and Villebois, plus corporate campus buildings. We handle HOA-compliant painting for residential and commercial properties throughout the area.
What We Paint in Wilsonville
Exterior Painting
Full siding prep — pressure washing, scraping, caulking, priming — followed by two coats of Sherwin-Williams exterior paint rated for Pacific Northwest weather.
Interior Painting
Walls, ceilings, trim, and doors. We patch drywall, tape edges, and apply low-VOC Sherwin-Williams paints for a clean finish with minimal odor.
Cabinet Painting
Factory-quality spray finish on kitchen and bathroom cabinets. We sand, prime with bonding primer, and apply multiple coats of durable enamel.
Deck & Fence Staining
Pressure wash, sand, and apply penetrating stain or solid-body coating to protect your wood from UV damage, moisture, and the Oregon climate.
Planned Communities and New Construction
Charbonneau — Wilsonville's signature 55-and-over golf community — was built from the 1970s through the 1990s. The homes range from compact single-story condos and townhomes to detached homes of 1,400 to 2,200 square feet. Siding materials include cedar lap, T1-11, and early fiber-cement. The Charbonneau Community Association maintains strict architectural guidelines including approved color palettes and application standards. We work within these guidelines on every Charbonneau project and submit samples for approval before starting.
Villebois is a newer planned community built in the 2000s on the former Dammasch State Hospital site. The homes are dense — rowhouses, townhomes, and compact single-family homes with zero-lot-line or narrow side yards. Siding is predominantly fiber-cement with some LP SmartSide and stucco accents. The dense construction means less airflow between homes and tighter access for ladders and equipment. We work carefully in Villebois to protect adjacent properties and shared surfaces.
The commercial areas along Wilsonville Road and Parkway Avenue include corporate offices, light industrial buildings, and retail centers. We paint these on maintenance schedules for property managers, using commercial-grade Sherwin-Williams products that meet the higher durability requirements of commercial properties. Wilsonville also has newer single-family subdivisions on the north side near Frog Pond that are still under development, using current-generation fiber-cement and engineered wood siding.
Prep for Wilsonville's Open Terrain
Wilsonville sits at the southern edge of the Portland metro in a relatively open, flat area along the Willamette River. The open terrain means more sun exposure than the tree-heavy neighborhoods to the north, and south-facing siding on Wilsonville homes chalks and fades faster than comparable homes in Lake Oswego or West Linn. The I-5 corridor also creates localized dust from traffic that settles on siding and must be washed off before painting.
We paint Wilsonville exteriors from mid-May through early October. The proximity to our shop — just 20 minutes on I-5 — means we can respond quickly to weather changes and schedule efficient multi-day work blocks.
- I-5 traffic dust removal wash
- Charbonneau HOA color sample submission
- Villebois tight-access equipment plan
- Factory primer assessment on new builds
- Edge-prime all fiber-cement nail holes
- Two coats acrylic with UV stabilizer
Why Wilsonville Homeowners Trust Our Crew
20 Minutes on I-5
Wilsonville is one of our shortest drives. We can pivot between exterior and interior work same-day based on weather, without losing a full day to rescheduling.
Charbonneau HOA Specialists
We know Charbonneau's architectural guidelines and color palettes. We submit samples for approval before starting — no wasted paint or do-overs because we did not check first.
Villebois Tight-Access Experience
Villebois homes are built close together with narrow side yards. We bring equipment sized for tight access and coordinate with adjacent owners to protect shared surfaces during prep and painting.
Clackamas County CCB Licensed
Oregon CCB #174196. Licensed, bonded, insured for all residential and commercial work in Clackamas County. Workers' comp on every crew member.
New-Build Paint Timing Advice
Frog Pond and other new Wilsonville subdivisions have homes with factory-primed siding that was never finish-painted. We advise painting within 2 years — the factory primer degrades and makes adhesion harder the longer you wait.
Corporate Campus Painting
We paint Wilsonville office buildings, retail centers, and light industrial spaces on maintenance schedules using commercial-grade Sherwin-Williams products rated for high-traffic environments.
Painting Questions in Wilsonville
Common questions from homeowners in Wilsonville, OR.
How much does painting cost in Wilsonville?↓
Charbonneau condos and townhomes run $3,500 to $6,000. Single-family homes in the 1,600–2,400 sq ft range cost $6,000 to $10,000. Villebois rowhouses cost $4,000 to $7,000 per unit. HOA color coordination is included in our service at no extra charge.
When is the best painting season in Wilsonville?↓
Mid-May through early October. Wilsonville's open position dries surfaces faster than shaded metro areas, so we can often start earlier in the season. We avoid painting on days when I-5 construction kicks up excessive dust that could contaminate wet paint.
Are you approved to paint in Charbonneau?↓
We are experienced with Charbonneau's architectural guidelines and work within their approved color palette. We submit color samples to the Charbonneau Community Association for approval before starting. Our Oregon CCB license is #174196.
Do Villebois homes have special painting requirements?↓
Villebois homes are built close together, so we take extra care to protect adjacent units during prep and painting. We use containment barriers between properties and coordinate with neighbors when scaffolding or spraying near shared walls. The Villebois Community Association may also have color guidelines to follow.
Can you paint commercial office buildings in Wilsonville?↓
Yes. We paint corporate offices, retail centers, and light industrial buildings in Wilsonville. We schedule around business operations, work in phases if needed, and use commercial-grade Sherwin-Williams coatings for durability.
Serving Wilsonville & Surrounding Areas
Our crews drive from our Woodburn headquarters — about 20 minutes north via I-5 — to work on residential and commercial properties throughout Wilsonville. We handle all surface preparation on site and leave the property clean at the end of each workday.